9-Sided Tactile Dice (Die)

I received a request for a 9-sided die with tactile markings. I was asked to use tactile bumps instead of braille characters. I found “The Donny” D9 die and added the pips I created for my previous tactile dice model.

I've posted 3 files that can be used to create a single color or multi-color die. 

• If you want a single color die, use the "9 sided tactile die" stl
• If you want multi-color die, use the “9 sided tactile die body” and “9 sided tactile die pips” stls. If you open these files together in your slicer, you'll be able to assign different colors to each stl.

I rotated this model before printing so that only one small point was touching the bed, and I let the supports act as the primary contact point for the bed. I tried to rotate the model so the very top surface was flat. You could also try aligning one of the edges along the bed, rather than just a single point. I would generally not recommend printing this with the pips lying flat on the bed, as that side of the die will not print cleanly.

Added tactile markers for blind players