OV7670 Camera module mount

Working on a module and it needs to be able to be aimed at something so I came up with this for the moment. I wanted…
0
43
0
345
updated February 28, 2022

Description

PDF

Working on a module and it needs to be able to be aimed at something so I came up with this for the moment.

I wanted access to the wiring so a case is not ideal, designed for push fit balsa wood, 3/8 or 9.6mm, so I made the square peg 9.5mm if you want to make a plastic shaft.

the top mount is removable as I figured I would want to make a different one later.

The nuts holding the camera onto the top plate are 3mm but are a little loose.

Category: Electronics

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License