Dish sponge tray with wring out holes - fits IKEA Vattudalen half-size sink

Dish Sponge Tray - for IKEA Vattudalen Half-Size-Sink

A dish sponge tray with holes for wringing out the sponge. 

Fits 2 sponges. Length 96 mm, width 75 mm or 1 big sponge 96x150 mm.
With holes for excess water or dripping out.

Dimensions:

Inner Space: 150 x 96 mm (W x L)
Outer Dimensions: 155 x 100 mm (W x L)
 

Maybe suitable for other half-sized sinks. May need size correction in the slicer (don't forget to disable aspect ratio). But the circular holes may be elliptic after resizing.

Recommended print settings:
 

• Supports: Organic or standard (at least for the ears)
• Material: ASA if you want to wash it in the dishwasher at 60 °C or PETG for lower washing temperature; PLA is not recommended
• Nozzle: 0,4 mm or as you wish
• Layer height: 0,2 mm
• Infill: Gyroid, 30% (the ears need a bit of strength due to stress while wringing out a sponge)
• Post processing for a smooth sealed surface without tiny holes is recommended as bacteria and mold will sit in these areas and contaminate a fresh sponge (food hygienic)