Karin Kuruma (Armored) - Hotwheels Model

A Hotwheels-sized model of the Karin Armored Kuruma from GTA 5 based on a 2015-or-so Lancer

Included are single piece six-spoke wheels, however any standard Hotwheels wheels will do. To install them, put them on an axle (even a paperclip will do), place them in the groove at the bottom and glue a piece of plastic over them. You can either glue them in place if you do not want them to spin, or just let spin freely like I did (to eliminate any wobble, I recommend adding another small piece of plastic between the axle and the top of the groove to make sure the axle does not move).

Included is also the stl for the stock spoiler of the Kuruma, but as it is way too small for my Ender 5 to print, I decided to just make it out of a PET container (if you want to know the details, feel free to DM me).

My model has been printed at 0.08mm layer height, but 0.12 should be fine as well.

Print has been tested on an Ender 5 pro. 

If you have any issues or questions, or want me to put together a different car in a similar way, feel free to contact me.