"Couchtischstråla" made with Ikea Stråla

This lamp stand is compatible with the E14 Ikea STRÅLA lampcabel (part nr. 203.664.04). It comes with a built-in cable organizer, and a side pattern for alignment of lamp shades.

Print it with at least 2 walls and a sacrificial layer for the hole or flip it upside down.

The print requires little to no infill depending on your printer's capabilities for bridging.

I brought the print time down to a print time of about 67min, with a 0,4mm-nozzel when printed with about 37g of pla, by printing it upside down (with 3 top and bottom layers, 2 walls, outer wall thickness of 0,4mm inner wall thickness 0,6mm, 0% infill).