Fire Keeper Mask from Dark Souls 3

T.A.G. workshop present our design of Fire keeper Mask from Dark souls 3 !
Model have extremely high Vertices count!

Include
-full Crown
-sliced for Smaller and Resin printers
Guide for Gems placement

pre supported included !
_
Scale size to fit or add EVA foam inside for comfort and better fit.

You can attach belts at the back ends of crown or glue it around whole crown from inside.

Use Acrylic or glass Decorative Hobby gems for crown, sizes for Gems better to get manualy after u done scaling and printing.

If u have dremel or small rotary tool u can cut out flat shapes in front of mask if u want increase visibility and see more than dark soul !
_
Cut pieces can be reinforced with other materials from inside for better gluing even EVA Foam / Metal wire / Wood Pick's

T.A.G. workshop Design and Property for Personal use only.

3D printing settings

3D printing:
Best Option- Resin 0.01-0,03 layer height (smaller layer line and good wash = no sanding) ABS Like / Tough or semi flexible resin.

FDM 0.12-0.16 layer height Slower speed (not possible to sand after due to loosing texture and small details with sanding)
PLA for easy print, ABS/ASA if u are advanced and want to use slight vapor smoothing !
(DANGER vapor smoothing must be done with respirator and in well ventilated area)