Oral-B AU Wall Socket

AU-Style Wall Socket for Oral-B Toothbrush Chargers

I’ve designed this wall socket to neatly hold and manage Oral-B toothbrush chargers. 
The model is split into two parts, making it easier to handle the cord and simpler to print.

Print Details:

• Layer height: 0.2 mm
• Infill: 10-15%
• Bottom part requires light supports (a 3MF file is included with optimal placements).
• Optional: 6x 6x2 mm magnets to connect the two parts, or use the included dowel model if you don’t have magnets.

UPDATE 

I've added a new larger version with m2 sized holes so you can use m2*3 nut insets on the bottom one.
You may be required to drill out the holes as I undersized them so nut sets were not too loose.