A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright.
Holes are 62mm in diameter to suit tubes with an outer diameter of 61mm or less. Size of the model can alternatively be adjusted in your slicer.
Available in varieties that will hold 2, 4, or 6 tubes.
Available also with plastic resin recycling logos for PLA or PETG in case someone wants to wash and recycle it, or so someone can look up to plastic type before they do something silly like put it in the autoclave.
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
3D Fillies PLA, PETG
Notes:
PRINT UPSIDE-DOWN.
Print so that the circular holes are facing down in order to print without supports. The model is already oriented this way for convenience, so don't change it (see attached image).Be careful to use the model with the correct plastic recycling logo (or use the model without any logo if not using PLA or PETG).
Category: BiologyThe author marked this model as their own original creation. Imported from Thingiverse.