Vesa Mounted Deej Volume Mixer

I wanted to share my Deej volume mixer enclosure!

I really liked my previous mixer but I wanted something that didn't sit on my desk and take up space when I was soldering or building gundam so I designed a vesa mount kit that hangs the deej volume mixer underneath your monitor!

I do not maintain the Deej repo so please do not ask for support.

Deej for Windows and Linux

Deej for Modern Linux

EndeavourOS already has the pre-requisites installed, but Mint requires you to install all the pre-requisites. Don't forget to give your user account access to the device.

Additional pieces:

This model has an expansion area in case you need more room than expected.

There is a spacer for the vesa mount that is in another profile if needed. They are 0.5mm thick and can be scaled in the z axis to make longer or shorter to ensure a flush install with the back of your monitor if your vesa mount points are in a well.

Required parts:

This model uses heat set insert for the back and the expansion bay for attachment.

The hole the for the heat set insert is 5mm and the hole for the screw is 4mm.

M4x6x6 insert is recommended with a m4x8mm screw is recommended as well.

Recommended parts:

A usb extender is recommended to run the cable out the back for easy connect/disconnect.

For the electronics please follow the standard deej build using potentiometers that follow this size and standard. Pins must be bent backwards at a 90 degree angle for fitment and ease of install.

The face of the mixer is 4mm thick so please take that into account when picking out parts.