Movable SKÅDIS holder for JV-100

Even though I bought a TS101 (and used the mount that juke94 created for that), I had a lot of T12 tips from my previous iron that I couldn't find replacements for that fit the TS101.
So I decided to buy a “JV-100 smart soldering iron” from AliExpress, that can also be powered by USB-C PD and fits T12 tips.

Of course, I needed a nice mount for it as well, so I recreated the holder part so that it fits the JV-100.
As thicker ring on the T12 tip is quite long and I didn't want them to poke the whole way through, I closed the bottom.
I also add a slightly higher wall around the holes for the tips so that they are a bit more stable (otherwise they were quite wobbly).

The other parts (Lock and SkadisMount) are unchanged from the original, but I decided to include them here for ease of use. In the picture you can see the TS101 holder next to the JV100 holder.

Recreated the holder to fit the JV-100 iron as well as T12 tips.