Tolerance test

This test has following features:

Horizontal and vertical cylinder test for 0,1 0,2 0,3 0,4 and 0,5 millimeter separation gaps for both 10mm pins and 4mm pins.

Overhang underside test for 50°, 60°, 70° and 75° angles.

Bridging test for 10, 15 and 20 millimeter bridge lengths.

Support separation test for 0,15, 0,20, 0,25, and 0,30 millimeter separation gaps.

Elephants foot compensation for 0,1, 0,2, 0,3, and 0,4 millimeter chamfer on bottom.

X accuracy test for 70 mm, Y accuracy test for 40 mm and Z accuracy test for 15mm (block) and 25mm (pins)

Space for marking testing conditions. Printer, filament, nozzle and profile.

Print without supports and without brim or raft with pins pointing upwards.