FPV Drone Carry Box (Meteor 75 pro) with 12 battery slots

Carry Box for Meteor 75 pro (no support)

I needed a simple box that could carry my drone and the 12 batteries I have.
I couldn't find anything small enough to fit in my bag and also strong enough that it wouldn't break.

• Case fit a drone the size of a Meteor75 pro
• Battery slots are for betafpv 550 Lava 1s
• The slot in the middle is ideal for your tools, I hold them in a small plastic bag so they don't move during travel

How you can use the case:

• Hold your drone and batteries
• Take off pad for your drone (I use it when the ground is wet or when I am on the grass

How to print:

• PLA 12% infill is way enough
• I use a 0.4 mm Nozzle
• No support needed (print vertically with the flat side on the plate)

For perfect fit:

• the lid will be tight to slid in…just sand the corners a little bit and it will work nicely

Update 21/09/2025: I have re-uploaded the lid (v2.1) as the previous version of the back wall was not joined perfectly. The print worked but better do it right!

Update 08/11/2025: Added Meteor75 vertical Case v2.2 Box - 5mm smaller height, the box is a bit smaller to save on filament. The drone will still fit nicely.