Monolithic HULA for Creality K2 Plus
Monolithic center core + adapter for HULA allowing to fix it on the printer bottom directly without rubber legs.
2
7
0
82
updated
September 15, 2025
Summary
PDFMonolithic center core + adapter for HULA allowing to fix it on the printer bottom directly without rubber legs.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Print original HULA parts PETg/TPU excluding center core, printer adapter and bottom case which to be replaced.
Print replacement parts (PETg):
- 4pcs - K2 Plus adapter combined with center core part (replaces center core and adapter at once).
- 4pcs - Bottom case with central bolt hole.
Assembly of each HULA:
- Put original (came with printer) leg bolt thru combined adapter (bolt head to down side).
- Assembly HULA according original instruction using replacement parts.
Mount a HULA adapter to printer assuming original rubber leg is already unmounted and HULA is assembled involving original bolts:
- Insert upper ledge into printer hole.
- Insert Allen key thru the center hole in bottom case part to bolt head hexagon and screw it to printer.
- Put TPU air pad onto HULA.
