Iron Sights (Low Profile) __ Nerf Rival Knockout Blaster __ XX-100 __ Rival K.O.

Low Profile (slide on) Iron Sights ---> Nerf Rival Knockout

For me it fits perfectly but It's a tight fit (like the original rail cover/adapter by ehdrien) and I can imagine that by printer tolerances and depending on the filament used, it could be a bit too tight for one or the other.

You could simlply scale x and y slightly (0,1-0,2mm) if it's too tight for you.

----------------------------------------------------------

The file is already pre-oriented.

It only needs approx. 4g of filament.

My print settings for PLA:
0,2mm layer height
3-4 walls
7 top and bottom shell layers
15-20% gyroid or cubic infill
(print with outer brim if you have poor bed adhesion)

Thanks to ehdrien for the file I could use for this remix.

• adjusted the length
   
• reinforced the wall thickness of the original rail cover/adapter that at least 3 walls are created during slicing process
   
• front and rear sights placed on the rail cover/adapter