Card Showcase Frame

I designed the frame as a way to show off cool cards that i have in my collection. 

To use the frame there are a few things you need.

1. a card that you want to show off (you may want to put it in a perfect fit sleeve to protect it further)
2. a top loader to hold the card in the frame (this is a standard sized 3 inches by 4 inches top loader)
3. some paper to act as a background for the card and to fill the top loader
4. some double stick tape or command strips to attach the frame to the wall.

Print Settings Suggestions:

For all the parts i printed them at .15mm layers. This is a display piece so I made sure to print this leaning towards quality instead of just speed.

For the back plate i used support material under the bridge to make sure the interface between the back plate and the wall clip is more accurate.

For the wall plate I used 6 perimeters to make sure the part is 100% solid and is less likely to break.