Prusa i3 MK2 X Carriage for i3 Duplicator Frame Mount System

This is an X carriage for the Prusa i3 MK2 hot end that works with the Duplicator Frame Mount System - https://www.prusaprinters.org/prints/141358-i3-frame-mounting-system-major-mod-to-i3-duplicato

A1 and A2 go together with 2 20mm long 3 mm bolts.

B is a combo of A1 and A2 for those who want to print it in one piece.

Print Settings

Supports: 

No

Resolution:

0.2

Infill: 

25

Notes:

Change the infill higher for more strength, if needed.