Titan Aero X Carriage for Duplicator Frame Mount System

This is an X carriage for the Titan Aero hot end for the Duplicator Frame Mount System - https://www.prusaprinters.org/prints/141358-i3-frame-mounting-system-major-mod-to-i3-duplicato

There are both sizes - 34 mm stepper and 26 mm stepper - with or without the BLTouch mount.

The bridge bolts to the x carriage with two 20 mm long 3 mm bolts.

Print Settings

Supports: 

No

Resolution:

0.2

Infill: 

25