Cats Hueforge Bookmark - Halloween collection

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 57.92x175mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0066d9 PLA PolyLite Azure Blue  Transmission Distance: 3
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #fffff7 PLA Prusament Vanilla White  Transmission Distance: 7.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Azure Blue
    At layer #13 (1.12mm) swap to Pumpkin Orange
    At layer #18 (1.52mm) swap to Vanilla White for the rest.