Bicycle spoke wrench tool

For tightening bicycle spoke nipples. 

• Print with the stronges material you have available to you for best performance.
• Tested with Prusament PC Blend Carbon Fiber (PCCF) and it held up great
  • Recomended to use at least 6 walls and ≥30% infill
  • No supports needed
  • Print with best quality your printer can manage
• Adjust the print scale to match your printer's tolerances or edit the .ipt file
• If a nipple is too difficult to loosen, use pliers - don't stress the printed part otherwise it could break

Numbers represent the second digit of numbered gauge diameters (eg. 2 = 12, 5 = 15, 0 = 10):

• 3.23 mm ( 10 )
• 3.30 mm ( 11 )
• 3.45 mm ( 12 )
• 3.60 mm ( 13 )
• 3.75 mm ( 14 )
• 4.00 mm ( 15 )