Lymow Contact Cleaner

I've read about multiple people complaining about dirty contacts and the unit not charging, Yesterday it happened to me and I came back to my Lymow at 0% battery. So I decided to fix it.

This was printed in ASA with 100% infill on all components the single foot is the one I used, but I did include a double foot incase.

The bar is optimized to print on a Bambu lab or any 256x256x256mm bed at an angle with automatic tree supports. I included two holed for cotter pins, but they may not be required.

Required Equipment: Two Scrub Daddy scrub sponge https://a.co/d/8QdX1xN

The Scrubber can be soaked in any dry lube, silicone, WD-40, Dawn dish soap or just left dry if you so choose.