Gothic Rose - Bookmark

Gothic Rose Bookmark

Can be printed without mmu, just follow these requirements:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 46.36x175mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm

Filaments Used:
#080a0d PLA PolyLite Black  Transmission Distance: 0.3
#0066d9 PLA PolyLite Azure Blue  Transmission Distance: 3
#ffffff PLA Prusament Pristine White  Transmission Distance: 5.1
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Azure Blue
At layer #12 (1.04mm) swap to Pristine White for the rest.