Eurorack rails

This is a modular, printable, Eurorack rails system. Includes 20HP and 4HP rails to create the usuals commercial lengths. Includes simple and double rails.

The holes are for 3M*4*4.6 brass heat inserts nuts.

Accepts M3 square nuts in the rails to ensure a reliable use.

Print one star, one end, and all the middle sections you need to reach the commercial length of your desire.

You can attach it to a case or any other place you need through M3 screws and the brass heat inserts.


 PRINTER SETTINGS

• 60m/s speed for the outer wall (there's many sharp corners and it's best to avoid bulging corners).
• No support: Plate it vertically with the side plate side facing the printer's plate).
• 10% hex infill.
• 0,4 nozzle and 0,2 layer heigh.