Ender 3 V3 KE Silicone Nozzle Wiper

I needed something to wipe oozes from the nozzle, and after trying the original model, I decided to remix it a bit. I use Bambulab style silicon pad and raised the pad for more clearance from bed.

First printed out of PLA, but the nut went through it after some time. Use nyloc nut if you can, the bed shakes and losens the nut once in a while. After trying with PLA, I printed it out from PETG and it has been working well. Nut is M4. 

Silicone pads, example here. Pad which I use is the A1 pad. 

I only use the brush in OrcaSlicer. Below you can see my own G-code, which I use for wiping. You need to edit the Start g-code from the slicer settings. You can copy code from below and just paste it there but be careful and test those nozzle heights to match your own printer.

M220 S100 ;Reset Feedrate 
M221 S100 ;Reset Flowrate 
M140 S[bed_temperature_initial_layer_single] ;Set bed temp 
G28 X Y ;Home XY axes 
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize 
G28 Z ;Home Z axis & load bed mesh 
BED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level 
M104 S[nozzle_temperature_initial_layer] ;Set nozzle temp 
G1 X-12.0 Y26.0 F3000 ; Move to start wipe 
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize 
G0 Z-1.490 F3000 ; Engage brush 
G0 Y-19.000 F6000 ; First wipe 
G0 Y26.000 F6000 ; Return wipe 
G0 Y-19.000 F6000 ; Second wipe 
G0 Y26.000 F6000 ; Return wipe 
G0 Y-19.000 F6000 ; Third wipe 
G0 Y26.000 F6000 ; Return wipe 
G0 Y-19.000 F6000 ; Fourth wipe 
G0 Y26.000 F6000 ; Return wipe 
G0 Z10 F3000 ; Clear brush 
G92 E0 ;Reset Extruder 
G1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position 
G1 Z0.2 ;Lower nozzle to printing height 
G1 Y145.0 F1500.0 E15 ;Draw the first line 
G1 X-1.7 F5000.0 ;Move to side a little 
G1 Y30 F1500.0 E15 ;Draw the second line 
G92 E0 ;Reset Extruder

I AM NOT RESPONSIBLE FOR YOUR GCODE, CHECK THE HEIGHTS AND DIMENSIONS OF YOUR PRINTER BEFORE USING THE BRUSH!

My model uses a silicone "brush" instead of a brass brush. I also modified the shape of the mount, as the shape of the original model did not fit my Ender 3 v3 KE.