Prusa Core One OBSBOT Meet SE Camera Magnetic Mount

Welcome!

I needed an easy way to add a camera to my Prusa Core One. I was looking for a small but high-quality webcam, and that's when I found the  OBSBOT Meet SE. The camera is made from aluminum, so it's strong, and records in 1080P 100FPS.

But I still needed a fast solution to mount the camera inside the Core One enclosure. So I designed one.
This mount will use magnets to magnetize to the printer frame and the metal body of the webcam. That way, you don't need to do any modifications for the printer at all, and the installation takes seconds! 

What do we need for this print?

1. 3 - 6x3 magnets. Link
2. 6 - 20x5x2 magnets. Link
3. Thin right-angle USB-C cable. Link
4. The Webcam. Link 

Print Settings

• Material: PLA BUT if you are using your printer to print ABS, please use PETG or above.
• Nozzle Size: 0.4mm
• Layer Height: 0.2mm
• Vertical Walls: 2
• Infill: 15%
• Supports: None

Hope you like this design, and if you make it, don't forget to post a make :)