iPhone 17, 17 Air, 17 Pro and 17 Pro Max cases

iPhone 17, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases

Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) - with these the case has a completely flat bottom, but is heavier and bulkier.

The models in folder “Thin with Mag-Safe” have a cut-out on the bottom for metal ring with size Dout 55 mm, Din 45 mm and thickness up to 0.6 mm. The print has to be paused and the ring inserted.

For the thin cases you can either print with support or cut the models at the defined height and glue both parts afterwards. Defined height:

1. iPhone 17: 2.3 mm
2. iPhone 17 Air: 4.7 mm
3. iPhone 17 Pro: 3.5 mm
4. iPhone 17 Pro: 3.5 mm

* iPhone 17 Air has only a thin case, what's the point of having a thick case with a thin phone :)

Check my other models for even better experience:

iPhone 15, 16 and 17 series 2K cases

If you like my work, consider buying me a coffee https://ko-fi.com/elektronchika