Taki-Mitsuha/Your Name - HueForge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2mm

Filaments Used:
#0f1713 PLA Sunlu Black  Transmission Distance: 0.1
#687b81 PLA Elegoo Slate Grey (MATTE)  Transmission Distance: 2
#ffffff PLA eSun White Cold  Transmission Distance: 1.4
#aa2316 PLA eSun Red  Transmission Distance: 2.9
#2baeff PLA Sunlu Cyan  Transmission Distance: 1
#ffffff PLA Elegoo White (MATTE)  Transmission Distance: 5.3
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #16 (0.76mm) swap to Slate Grey (MATTE)
At layer #21 (0.96mm) swap to White Cold
At layer #34 (1.48mm) swap to Red
At layer #43 (1.84mm) swap to Cyan
At layer #48 (2.04mm) swap to White (MATTE) for the rest.