Universal-Steckdosenhalter mit Anleitung

So this is a holder designed for a powerstrip from “EASY HOME” i'll share its dimensions in a second. The length is not important because the holder is open at the top and therefore fits powerstrips with different lengths.

If your powerstrip does not fit the holder, keep in mind you can scale it in PrusaSlicer/Bambu Studio/etc.:

1. Turn of the uniform scaling
2. Divide the measured lengths from your power strip by the matching lengths of the holder (e.g. the length from left to right: 48mm)
3. Scale your model with this value in the right direction (here in x-direction)
4. Repeat this with the other length (front to back (41mm) and y-direction which is green in bambu studio)
5. Congrats it should fit now!

48mm

41mm