16x20in Poster Frame

A decorative frame for a 16inch by 10inch poster. Sized such that a thin canvas slides in and is held snuggly. I made cuts and added locating pins within the slicer itself since this is far too large to print in most desktop printers.

I printed with Inland Matte Black PLA, 0.2mm layer height on a 0.6mm nozzle on a Core One. G-code included. 

I had success leaving the part vertical in the slicer, cutting at 180mm (three segments) but 120mm will also work for smaller form factor printers (four segments). Print on the outside edge, with the gap facing up, with a 0.2mm offset for the locating pins (if using). 

If you want another size, G-code for another printer, help slicing, or another thickness of poster (heavy canvas, paper, etc) let me know and I'll help out!