Boxes with sliding lid

Boxes with sliding lid

Also see … https://www.printables.com/model/1427780-round-boxes-with-sliding-lid

One .3MF-file only as example

But many STL-files sorted by height (Z), Z30, Z35, Z40, Z45 and Z50

X and Y from 40 up to 100 in 10-steps

The files are named

BoxSlidingLid_X80_Y50_Z35_Box, for the Box (_Z35 is including the lid rail height, so max 31 mm height space)

BoxSlidingLid_X80_Y50_Z35_Lid, for the Lid (_Z35 really not neccessary, but due to technical issues :-))

If you want a size that is not listed, send me a message and I will make it happen!

Autodesc Fusion parametric file

I got a request to publish the Fusion 360 file (or Autodesk Fusion as it is now called) and after some consideration I will do so. It is parameter driven and X, Y and Z are the most common parameters. You can of course change the other parameters too, try and see what happens (but don't change the YLidLockGap, it should be 0.1mm). 

If you make it big the lid will appear over the box, but that doesn't matter, you have to save the lid and box separately anyway. There is one difference compared to the published stl files and that is that the "pads" on the lid are 0.1mm thicker. 

See under f3d folder

Anyway, if you use it for new boxes please give me ATTRIBUTION for it!