Deep Rock Galactic - HueForge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.44mm

Filaments Used:
#000000 PLA eSun Black  Transmission Distance: 0.1
#aa2316 PLA eSun Red  Transmission Distance: 2.9
#ffff27 PLA eSun Yellow  Transmission Distance: 4.8
#ffffff PLA Elegoo White (MATTE)  Transmission Distance: 5.3
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Black
At layer #19 (0.88mm) swap to Red
At layer #46 (1.96mm) swap to Yellow
At layer #48 (2.04mm) swap to White (MATTE)
At layer #52 (2.2mm) swap to Red for the rest.