30+ Ikea Simple Hooks Mega Pack - Vol 1 - Ikea Skadis - Commercial Use Allowed

Work in Progress

This is based on my older mega hook pack from Thingaverse.  But I reworked the hooks to try and accommodate the slotted pegboard style of the Ikea Skadis.  Because I kept it to a single hanging hook entry, this could actually work with other slotted pegboards.

Esty folks, yes of course, you are free to go and print and sell these. 

Need a hook design that isn't included?  Drop a comment and I'll add them in the next update.

Naming

The files are named based on the length of the bar.  So if it says “bar_15” that's a bar-style hook, that is 15mm long on the active part of the hook.

Printing

I recommend printing them in their default (flat side).  This will give you the best strength for the hooks.  If for any reason you find your printer is over-extruding (and the hooks aren't fitting in the slots), you can reduce the scale to 95%.  But they fit fine for me on my 3 printers.

Version History

Version 2.0 - 2025/09/09 

• Recreated and checked hooks for non-manifold geometry
• Reduced polygon count by ~25% (easier on older marlin devices)

Version 1.0

• ~30 different types of hooks, J Hooks and what I like to call Vampire Bites
• Sizes range from about 10mm to 50mm