Bag Hanger

This is a remix of the bag hanger made by Rogierrzz. I adjusted the model to fit bags with a larger padded handle such as the one in the picture. A bag handle as large as 35 mm can sit confortably on this hanger.

I also made the hook's edges less sharp by applying a small bevel.

The hanger fits tightly on a rod 30 mm in diameter.

Print on the flat side of the hook so you don't need supports.

Feel free to post improvement suggestions in the comments if you need the hanger to fit a different

edit: Added a version 2 of the model where I beveled the sharp edges to make the model smoother and reduce the risk of damaging the backpack. It also requires a tiny bit less material but is as easy to print as the first model.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Infill:

30%

Filament:

ESun PLA

White

Notes:

I used around 30% infill with the gyroid pattern. I only use it for empty bags so use higher infill percentage if you plan to hang bags with stuff in them.

Category: Accessories