Irwin Jab saw / drywall saw sheath

This is a fancy sheath for an Irwin jab saw. Made it out of PETG. 

Fits a 1.55mm blade but should fit most saws.

You can print 2 tone colours like I did (use superglue to join together) or you can just print the main body

I have included the fusion file if you are keen to play around. Change saw thickness to  your saw thickness +1mm. Friction plate is set to 1mm. If the saw is too loose increase value, if the saw is to tight decrease value. if you want to change the file significantly I recommend using it as guide

This went through 4 prototypes. FOUR! I overdid it a bit (so naturally the timeline is a mess)

Feel free to ask any questions.