Replacement Turn Signal Lever for most kymco scooter models.

A very simple turn signal lever designed after 2 peaces of the original one. may be a bit tedious to put it and may require some sanding to get it to move smooth. Mine took a month to wear in and feel like the original one.

Installation guide:

• Power scooter off
• Remove mirror and all other plastics to get to the bolts holding the button assembly
• Unscrew button assembly, unplug its electrical connector (be mindful of fragile plastic tabs)
• Unclip (Unscrew depending on model) the turn signal button from the assembly.
• push it towards the front (it comes out of the front of the assembly)
• carefully unclip its 2 parts, be mindful to not loose the small ball or spring.
• sand new lever until ball and spring move smoothly
• sand new lever notch, top and bottom part until switch moves smooth in assembly (may take a few tries, be patient and don't loose parts)
• do everything from step 6 to 1 backwards
   
• ENJOY YOUR FREE TURN SIGNAL FIX!

If this helps you please upload a make! 

AS always, happy printing and safe riding, hopefully you won't need to print another.