fidget malteser | Geneva drive | Malteserkreuzgetriebe
a fidget spinner as a Geneva drive or Geneva mechanism
2
14
2
101
updated
October 18, 2025
Description
PDFfidget malteser | Geneva drive | Malteserkreuzgetriebe
→ 0.4 Nozzle
→ 0.2 mm Layer Height
→ 30% infill
→ PLA
Deburr all parts well and remove the Z-seams from the pins with the file or similar tool. The pins and gear parts should move freely and the heads of the pins must just finish with the sinkhole. When mounting the pins, use a flat surface (table) and press in with light pressure.
Tags
Model origin
The author marked this model as their own original creation.
