Side Panel Mods for A07 ITX PC Case

Sidepanels for the CPU and GPU Side of the 4.4 Litre ITX Case from Aliexpress called A07.

The CPU Fan used for this (so it fits) Thermalright AXP-90 X36 Black Low Profile CPU Cooler
GPU Fan: Thermalright C12015B 120mm Slim Fan with an adapter connected to the GPU

This was designed to fit my case, so your case might have different mounting holes.

Printed in PETG with 0% infill as its only 2mm in height. Use your favorite PETG settings.
I used my high quality settings for a correctly setup PETG. (Sunlu Matte PETG) and a 0.1 layer height. (yeah I guess that was overkill)

Adding the Shapr3D files to make adjustments if you want. (This was my first time using CAD so dont expect a masterpice, it will compute forever because I think I made a mistake how I created the honeycomp pattern… :)

P.s. you probably need a Shapr3D Subscription or Trail. With the Free Version the polygon quality of the exported STL or 3mf is to low and results in a very bad print, especially with the honeycomp pattern beeing basically two walls side to side.