Creality CV-01 Laser Engraver Mount and Walls

These are parts for a partial enclosure for a Creality CV-01 Laser Engraver.

• Mounting Base feet that the engraver fits into for reliable positioning.
• Corner and edge guides for positioning the sacrificial board.
• Top and Bottom corners for a wall; these accept 1/4 inch board.

The base is a 1/4 inch thick, so that it lines up with a 1/4 inch sacrificial board.

All screw holes were designed for #8 3/4 wood screws.

If you want the walls, this fits nicely mounted on a 2' x 2' piece of plywood/mdf. My purpose for the walls is so that my kids don't wander into the room and look up into the laser.

Given the wall height I made, the top wall corners are not necessary for the wall stability, but I designed them, so I printed and used them.