Gohan/Dragon Ball Z - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.38x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.16mm

Filaments Used:
#f7d7b7 PLA Elegoo Beige (MATTE)  Transmission Distance: 2.1
#0e206e PLA eSun Blue  Transmission Distance: 1.9
#aa2316 PLA eSun Red  Transmission Distance: 2.9
#000000 PLA eSun Black  Transmission Distance: 0.1
#ffdc3e PLA Sunlu Yellow  Transmission Distance: 6.5
This print uses 5 unique filaments

Swap Instructions:
Start with Beige (MATTE)
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Red
At layer #11 (0.96mm) swap to Blue
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to Blue
At layer #18 (1.52mm) swap to Black
At layer #19 (1.6mm) swap to Blue
At layer #21 (1.76mm) swap to Red
At layer #23 (1.92mm) swap to Yellow
At layer #26 (2.16mm) swap to Beige (MATTE) for the rest.