Phase One IQ4 Adapter for Tether Tools TetherPro Optima Cables

From Tether Tools Labs, the Phase One IQ4 Adapter for Tether Tools TetherPro Optima Cables is a secure precision fit for the digital back’s USB-C port. 
 
Once the adapter is printed, take your Optima tether cable and locate the end with the camera icon.  Slide the adapter over the cable end and push the adapter on until you feel the adapter click into place.  When installed properly, the adapter will line up even with the end of the cable. 

• Adapter is compatible with all orange or black straight end Optima cables.  This item is not compatible with right-angle Optima cables. 
• Ensure you are installing the adapter on the cable end with the camera icon 
• The adapter is a precision fit.  To prevent damage to the adapter, when installing or removing, hold the adapter on the thicker ribbed section.
• Some 3D printers may not be able to get the precise corner radius where the adapter inserts into the IQ4 Back.  It may be necessary to use a fine grit sandpaper or nail file to slightly round off each corner.

Tether Tools Optima 10G straight cables can be found here: 

https://tethertools.com/product/tetherpro-optima-10g-usb-c-straight-to-straight-cable/ 

Share your build on social and tag @TetherTools!