Warehouse Pallet for RC Forklift

I love what ProfessorBoots (https://www.printables.com/@ProfJohnny_823077) has given to the 3D community.  Please support ProfessorBoots for all of his work to make these models come to life.  It does take hundreds of hours to make these models, electronics, and software.  https://professorboots.com/products/professorboots-workshop-pass

These parts should be functionally equivalent.

I like to create 3D models that follow these criteria:

• Do not require supports – I HATE supports.
• Print quickly – optimized for 0.4mm nozzle diameter with 2 exterior wall thickness
• Are easy to access for maintenance – I like to upgrade parts, but I hate to disassemble the entire model just to change out one part.
• Are chamfered on the bottom layer – this helps those who don't have a perfectly aligned bed and may still have “elephant foot” artifacts.
• Do not waste plastic – many designers make parts that are WAY thicker than are required for structural strength.  This just makes the parts bulky and take longer to print.

Notes

• All components can be printed in their existing orientation with NO SUPPORTS REQUIRED.
• Pallet Edge can be stacked on pallet to load items like tires, blocks, etc.
• Batter Holder can be placed inside a Pallet Edge to hold up to 9 CR123 batteries.
• Spool Cap clips onto the pallet to hold spools of wire like the enameled copper wire spool.
• Screwdriver Rack provides convenient storage for screwdrivers
  • Amazon: https://www.amazon.com/dp/B0BB6NZDD7
• Solder Spool can be constructed to dispense solder directly from the pallet.  It uses the following parts. I used M2.6 x 6mm screw through the bottom of the pallet to secure the solder spool.
  • Solder Bolt (qty 2)
  • Solder Frame (qty 2)
  • Solder Spool (qty 1)
  •  607-2RS bearings (qty 2)
    • Amazon: https://www.amazon.com/SHKI/dp/B09PKD8QZZ
    • AliExpress: https://www.aliexpress.us/item/3256804579616875.html

These are pallets to use with the RC Forklift