Chihiro/Spirited Away - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.3x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.24mm

Filaments Used:
#394a59 PLA eSun Dark Grey  Transmission Distance: 0.2
#eefeac PLA Sunlu Lemon Yellow  Transmission Distance: 7.4
#000000 PLA eSun Black  Transmission Distance: 0.1
#774b27 PLA Elegoo Brown  Transmission Distance: 1.4
#e28538 PLA Sunlu Orange  Transmission Distance: 5
#aa2316 PLA eSun Red  Transmission Distance: 2.9
#ef90bb PLA Sunlu Pink  Transmission Distance: 4.5
#ffffff PLA Elegoo White (MATTE)  Transmission Distance: 5.3
#f7d7b7 PLA Elegoo Beige (MATTE)  Transmission Distance: 2.1
This print uses 9 unique filaments

Swap Instructions:
Start with Dark Grey
At layer #8 (0.72mm) swap to Lemon Yellow
At layer #9 (0.8mm) swap to Black
At layer #12 (1.04mm) swap to Brown
At layer #13 (1.12mm) swap to Orange
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to Pink
At layer #17 (1.44mm) swap to White (MATTE)
At layer #19 (1.6mm) swap to Beige (MATTE)
At layer #20 (1.68mm) swap to White (MATTE)
At layer #27 (2.24mm) swap to Beige (MATTE) for the rest.