Makita Double Makita Charger Wall Mount

The photos demonstrate how the expanding pegs work.  The STL provided is the full mount.

Print as-is without supports.  Three walls are recommended.

Four #8 ¾" sheet metal screws are required for this model.

The screw storage recess is not utilized, but is left on the remix due to laziness.

• Object orientation was changed so that it's ready for print.
• The bridging required to be removed from the original model is no longer required via 2 layer method.
• Rubber feet recess was modified so that it can actually provide grip.
• The screws from the charger no longer need to be removed.  Instead an expanding peg is used along with a #8 ¾" screw to friction fit the mount onto the charger.