Curtain Rod Holders and Shim Sleeve Replacements

   Created a replacement set for Curtain Rod Holders and Shim Sleeves for 18mm Dia Curtain Rod.  During recent house cleaning several sets of curtains were taken down to be washed.  One particular Curtain Rod and its Holder set needed to be replaced after 23 years of fateful service.    Like always I drew the design on paper after measuring all aspects of the new model.  I recreated the Holders and Shim Sleeves in Autodesk Fusion (formerly Fusion360). I printed the replacement parts on the Creality K1C in Creality Hyper PETG, White. The plastic wall anchors were fine and did not need to be replace.  I reused the existing mounting screws.  The screws were brass in color 18mm in length, with a 4mm Dia, with a 5mm button type cross tip head.