Multiboard Universal Build Plate Holder 4x - One large slot (glass plate)

Remixed from here by Michael Sheldon

For the bolts, I used this one

Change: 4 slots instead of 5, one slot is 6mm, for use with a glass buildplate

Original description:

I wanted a build plate holder that could handle multiple plates, and mount on multiboard without feeling like it would pull off if I pulled out a plate badly. 

Features of this holder:

• Five slots, 1.2mm deep. Will hold even my thickest build plate.
• Two pieces, place them at whatever width you need. The slots are 40mm wide on each side, so plenty of support if your width is not “perfect” on a 25mm increment.
• Two pieces are much easier to print, will fit easily on small printers like the Prusa Mini or Bambu Mini.
• Each slot is staggered by 5mm vertically, making it easier to see and pull the plate you want.
• Mounts using four Large multiboard bolts, two on each side of the holder. A 9mm bolt should be sufficient, but I use 13mm because I'm paranoid. The holder is rock-solid on the multiboard.

Note: You will need to print four Large Multiboard Bolts 9mm or 13mm, these are not included in the print files. They can be found at https://www.multiboard.io/parts-library/threads/
 

I have a glass build plate that wouldn't fit in the original, so I removed one of the dividers in the back to accommodate for the extra thickness.