Horizontal Card Divider w/ Flat Tab

These card dividers are great for shallow boxes where the cards are stored horizontally. While this set was specifically designed for the Tales from the Loop board game, they could be used for most any game. Simply scale the divider up or down to fit your box. I would not recommend adjusting the z-axis as it may become too thin to print, but otherwise scaling on the x and y axis should be fine.

Default scale is 90mmx68mm.

The original card dividers were great, but some of my stacks of cards are smaller and I wanted to be able to have the tabs not only swap back and forth, but also nest on top of each other. Thus I created mirrored dividers, made the tabs shorter, and added a notch for nesting.