Bob The Sentient Washing Machine

These are the 3D print files for Bob The Sentient Washing Machine. In the unlikely event you have stumbled upon these randomly, please know they are designed specifically to function as a Desktop chatbot buddy device using a Raspberry Pi. 

The Required items to build Bob are as follows: 

• Some PLA (color up to you)
• 1.28" Waveshare Round LCD Display
• A Raspberry Pi (Pi 5 8gb preferred) 
• M3 Screws and Nuts
• 2x 12mm Momentary Push Button Switches
• 4x Jumper Wire to wire the Push Button Switches
• USB Button Microphone
• BT Speaker (or 3.5mm if using the Pi 4)

Additional information related to Bob, such as the full 80 minute long tutorial to build/set up from the ground up is available on the Bijan Bowen YouTube Channel. Bob does not require any supports to be printed and all files have been oriented correctly for printing and will fit on any 180x180+ Printer.