Minimal K-Cup recycler

I use mine a lot. I've grown tired of twisting the threads off for the assembly bolts as well as the ejector bolteven with my reinforced remix.

This remix provides yet another alternative. I've eliminated the assembly nut and bolt combination, so you'll need to provide your own. I use bolts that are no larger than 7.5 mm in diameter andat least 25 mm in length. I've also eliminated the ejector and provided a clip-held plate because I'd rather not use glue, and I prefer to pull off the top of the cut K-cup with my finger tips rather than re-tightening the nut (eventually twisting the threads off for that, too) when it becomes loose every few days.

Print Settings

Printer Brand:

FlashForge

Printer: 

Creator Pro

Rafts:

No

Supports: 

No

Resolution:

200 (.2 mm)

Infill: 

15-25% . Use 3 shells

Filament: Any brand filament PLA Any color filament

Notes:

There's been some tweaking of some of the parts, better print them all even if you have a working recycler.

Listed at Thingiverse as remix of 

K-Cup Recycler v6

https://www.thingiverse.com/thing:4683310

Category: Gadgets