Bosch Fridge Crisper Humidity Regulator Hinge Replacement

Replacement of broken hinge elements in the crisper humidity regulation cover of a Bosch refrigerator.

Materials

Next to the printed parts, you will need the following materials:

• [4×] Screw M3, 12 mm
• [4×] Nut M3, self-locking

Additionally, you will need some tools to remove the broken hinge and clear the area.
Furthermore, you will need a 3 mm drill bit. Use the 3D-printed stencil to align the drill holes.
A pair of needlenose pliers or similar is necessary to hold the nuts while fastening the screws.

If you like this design, please consider leaving a ♥heart. Thanks!