Nintendo Switch Joycon Rifle / Gun / shotgun

This one is very rough and I had a few issues creating some parts of the model but if you follow the instructions it should print fine for you. I printed this on an Ender 3 v2 with the following Cura Settings:

Draft Quality (0.32mm)

Infill 10%

supports (touching plate) 20%

All three parts can fit onto the bed at once and took around 12 hours to print. I would print it with the 'controller catches' at the top, see my Cura picture for an example (rotate part 3 upside down / 180 degrees - sorry i didn't want to mess with it as it printed fine). Also Part 3 has a small issue and has an extra bit of material on that side which I could not remove for some reason (walls started to disappear). This means if you then try and print it there's a gap between it and the bed. To resolve this problem set the part to be -0.3mm on the Z axis (for that part only), so it's just under the bed and it will print fine.

Also because of the wall disappearing problem I got sick so the model does not clip together. All you need is a bit super glue to join the three parts together :)

I don't own any copyright, etc for Nintendo I am just a fan

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.32

Infill:

10

Post-Printing

Super glue it together!

How I Designed This

a few different programs

I mainly used MatterControl however I did put the model into Blender to do a few tweaks, but don't really know how to use it (next mission to learn it). Then as the model seemed to have a few issues I put it into 3d builder and clicked fix and it all turned out well..........

Any tips on what programs I should be using please let me know. I started to learn CorelCad 2019 however it keeps crashing on push/pull's

Category: Toy & Game Accessories