Thread insertion for "Samsung Galaxy S7 Edge Tripod Mount"

If you don't have a fitting metallic nut for the Samsung Galaxy S7 Edge Tripod Mount by AntoDelG, you can center the attached thread into the nut hole of the original part within the slicer.

To be able to print without support, I changed the orientation and vertical position of the part and limited the printed height to cut the foot partially.

Print Settings

Printer:

FIashForge Dreamer

Rafts: 

No

Supports:

No

Resolution: 

0.15mm

Infill:

30%

Notes:

The best results you will get using PETG as print material.

How I Designed This ===================

designed with FreeCAD

Category: Mobile Phone